CIRCUTOR PowerStudio Series - Manual (Page 92)

PowerStudio PowerStudio
92 User Manual
Displays general information about the device.
• Period: Maximeter integration period, which can vary between 1 and 60 minutes.
• Unit: Maximum demand can be calculated using the active or current power.
• Maximeter reset: Pushing the button resets the maximeter to zero.
This allows you to select the number of quadrants to use for the output of pulses. With only two
quadrants you can select the energy consumed, with four quadrants you can select the energy
consumed and generated.
Select the output you would like to use, only one can be active.
Pulse output. This option will be activated on selecting pulse output.
• Unit: Allows you to select between active and reactive energy. If two quadrants are selected,
you can only select the energy consumed; however, if four quadrants have been selected, you
can select the energy consumed and generated.
• Output pulse width: The values will be between 100 and 4000 ms.
• Output pulse active energy ratio: The number of pulses/kWh must be between 1 and 100.