ATL Telecom R1-SW Ethernet Switch - Manual (Page 185)

Configuring QoS
9-17
Configuring QoS
This section describes how to configure QoS on the Corecess R1-SW24L2B.
Configuring QoS Service Policy
A QoS service policy consists of a classification policy and QoS policies that are applied to a
particular interface. The Corecess R1-SW24L2B supports the use of class maps and policy maps
to create or modify a QoS service policy.
The following diagram shows steps for configuring QoS service policy:
The sections which describe how to configure each step follow.
Defining Class Map
Defining Policy Map
Configuring
Policy Map Class
A class map consists of criteria for classifying traffic into several
classes. The first task for configuring QoS service policy is defining
class maps
.
A policy map consists of classes which have actions to apply to the
traffic class. The second step for configuring QoS service policy is
defining policy maps.
A policy map class consists of actions to apply to the specified class
of traffic (bandwidth priority, filtering, rate limiting). The third step for
configuring QoS service policy is configuring policy map class.
Applying
Service Policy
A service policy consists of a policy-map and ingress/egress ports
which the policy map will be applied to. The last step of configuring
the QoS Service policy is defining service policies.
X
Y
Z
[