ATL Telecom R1-SW Ethernet Switch - Manual (Page 271)

Configuring STP/RSTP
13-13
Topology changes: 0
Designated Root BridgeID: 0x8000-00905ACC0202
.
.
#
To restore the bridge ID for a VLAN to the default priority (32768, hexa decimal : 0x8000), enter
the no stp bridge-priority command in Global configuration mode:
(config)# no stp bridge-priority vlan id 2
(config)# end
# show stp vlan id 2
VLAN ID: 2
Protocol Operation: enabled
Root Bridge: yes
STP version: rstp(2)
Pathcost Encoding: 32bit
BridgeID: 0x8000-00905ACC0202
Time since topology change: 1968(s)
.
.
.
#