ATL Telecom R1-SW Ethernet Switch - Manual (Page 75)

Basic Configuration
5-7
Prompt
On the Corecess R1-SW24L2B CLI prompt, the node name and current command mode are
indicated as follows:
localhost(config-qos)#
The default node name is ‘ localhost ’. This default node name is used for the prompt until you
change them. The following table provides the prompt of the main command modes.
Table 5-3 Prompt of the main command modes
Command Mode Prompt
User corecess
>
Privileged
corecess #
Global corecess(config)#
Interface corecess(config-if)#
QoS corecess(config-qos)#
Class-map corecess(config-cmap)#
Policy-map corecess(config-pmap)#
Configuration
Policy-map-class corecess(config-pmap-c)#
Note: You can change the node name of the Corecess R1-SW24L2B by using hostname global
configuration mode command.
Node name Command mode