ATL Telecom R1-SW Ethernet Switch - Manual (Page 245)

Configuring IGMP Snooping
11-11
The following example displays the multicast groups for the default VLAN:
# show ip igmp snoop vlan id 1
---- --------------- --------------- ---------- ------- -------
vlan mac group group ip ports type timeout
---- --------------- --------------- ---------- ------- -------
1 1:0:5e:64:64:65 239.100.100.101 1/1-4,2/1 static N/A
---- --------------- --------------- ---------- ------- -------
Total number : 1
---- --------------- --------------- ---------- ------- -------
#
The following table describes the fields in the show ip igmp snoop command output:
Table 12-17 show ip igmp snoop field descriptions
Filed Description
vlan VLAN ID of the multicast group.
mac group MAC Address of the multicast group.
group ip IP Address of the multicast group. In case of a static multicast group, 0.0.0.0 is displayed.
ports Interface through which the group is reachable.
type
How the multicast group is registered.
- static : Multicast groups that are directly connected to the system.
- dynamic : Multicast groups that were learned by IGMP snooping.
timeout left
How long in seconds until the entry is removed from the IGMP groups table. In
case of a static multicast group, 0 is displayed.