ATL Telecom R1-SW Ethernet Switch - Manual (Page 60)

R1-SW24L2B User’s Manual
4-8
100/1000Base-LX/SX Port
The 100/1000Base-SX/LX SFP module can be installed in the SFP slot of the uplink modules on
the Corecess R1-SW24L2B, and the Corecess R1-SW24L2B can be connected to the core network
using the 100/1000Base-SX/LX SFP module. Depends on the type of SFP modules, connect
cables as follows:
1000Base-SX SFP Module
When the 1000Base-SX SFP module is installed in the SFP module slot, use the 850nm Multi-
mode fiber optic cable. Prepare the fiber optic cable of the duplex LC type, and then connect to
the Gigabit Ethernet network.
1000Base-LX SFP Module
When the 1000Base-LX SFP module is installed in the SFP module slot, use the 1310nm Single
mode fiber optic cable. Prepare the fiber optic cable of the duplex LC type, and then connect to
the Gigabit Ethernet network.
R1-SW24L2B
Gigabit Ethernet Switch or Router
1000Base-LX SFP Module
1000Base-SX SFP Module
Single Mode Fiber Optic Cable
y
Connector : Duplex LC
y Wavelength : 1310nm (Rx, Tx)
y Max. cable length : 10Km
Multi-Mode Fiber Optic Cable
y
Connector : Duplex LC
y Wavelength : 850nm (Rx, Tx)
y Max. cable length : 550m