File and resource sharing protocol filtering – ATL Telecom R1-SW Ethernet Switch User Manual

Page 225

Advertising
background image

Configuring Security

10-15

File and Resource Sharing Protocol Filtering

To prevent hosts that are connected on the same VLAN from sharing files and resources, the
R1-SW24L2B can filter protocols as follows:
















To filter the packet of file and resource sharing protocol, use the following commands.

Table 10-6 Filtering File and Resource Sharing Protocol

Command

Task

qos

1. Enter QoS configuration mode.

2. Set to deny receiving particular protocol packets.

apple-filesharing-protocol

filter discard

2-1. Refuse Apple FileSharing packets. This command is applied

to all ports.

netbios filter discard

[port <port-type>

<slot>/<port>]

2-2. Refuse NetBIOS packet received to the specified port.

y <port-type>

Port type

(fastethernet, gigabitethernet)

y <slot>/<port>

Slot number and port number

rendezvous filter discard

2-3. Refuse Rendezvous packets. This command is applied to all

ports.

upnp filter discard

2-4. Refuse UPnP packets. This command is applied to all ports.

end

3. Return to Privileged mode.

show running-config

4. Verify the filtering configuration.

Corecess R1-SW24L2B

Internet or LAN

Ethernet Switch

호스트

호스트

Host

Host

Advertising