Kurzweil Forte - Manual (Page 140)

Program Edit Mode
The DSP Modulation (DSPMOD) Page
7-43
The DSP Modulation (DSPMOD) Page
Before reading further, be sure to read Algorithm Basics on page 7-34 and Common DSP
Control Parameters on page 7-35 .
Press the DSPMOD soft button to call up the DSP Modulation (DSPMOD) page, which
displays the current layer’s algorithm, and highlights the corresponding function-block when
you select parameters.
DSP Mod Page Parameters
Parameter Range of Values Default
Source 1 Control Source List Off
Depth (Depends on Function) 0
Source 2 Control Source List Off
Depth Control Control Source List Off
Minimum Depth (Depends on Function) 0
Maximum Depth (Depends on Function) 0
Each field in the left-hand column of the page is a function-parameter of the current layer’s
algorithm. You can coarsely adjust the function-parameter in these left-hand fields—as noted
in Common DSP Control Parameters on page 7-35 , any adjustments made to the function-
parameters on the DSPMOD page are reflected in the corresponding function-parameters
on the DSPCTL page. The right-hand side of the DSPCTL page is the subpage of the
highlighted function-parameter—on the subpage are the programmable parameters. To
access the parameters on the subpage, highlight the function-parameter you wish to edit, and
then press the > button to move the cursor into the subpage.