Kurzweil Forte - Manual (Page 335)

System Mode
System Update
14-5
6. If the system was able to read the USB flash drive that was plugged in, it will display a
list of files and folders as shown below. You can use the arrow buttons or Alpha wheel to
move up and down the list. Select the UP soft button if you want to go up to the parent
directory level. If the KUF file is selected, select the OK button.
You will see a progress bar indicating the progress. If update was successful you will see a
confirmation message. If there was a failure you will see a self-explanatory failure message
(with error code) to indicate the failure.
Install Using a Computer/Tablet
1. Download the System Update file from the Kurzweil website or another reliable source
and save it in a known folder or directory accessible to your computer/tablet.
2. Connect the Forte (powered off) to the computer/tablet with the USB cable provided
into the USB Computer/Tablet slot.
3. Follow the instructions specified on Page 12-1 to enter System Mode.
4. In System Mode, select System Update.