Kurzweil Forte - Manual (Page 284)

Multi Edit Mode
FX Page
11-33
FX Page
The Forte contains Kurzweil’s acclaimed effects processor, and when combined with Multi
Mode it puts the power of an entire studio of audio effects at your fingertips. This section
contains everything you’ll need to know in order to use the Forte’s effects in Multi Mode.
Press the FX soft button to enter the FX page.
FX Page Parameters
Parameter Range Of Values Default Value
Enable Y, N, (Y) Y
Aux1 [p], 0 to 100% [p]
Aux2 [p], 0 to 100% [p]
AuxFX Ch 1 to 16 1
AUX1 Override Yes, No [p]
AUX2 Override Yes, No No
Chain Effects List (Appendix F) No
Mod Override None, Control source None
Output Auto A, B Auto
Enable
Use the Enable parameter to enable or disable the Insert and Aux effects Chain of the
Program in each MIDI channel. (The MIDI channel for each Zone can be set on the Zone
Main page.) Each MIDI channel can be set to Y to enable Insert effects, or to N to disable
Insert effects. Use the Alpha Wheel or Value buttons to change between Y and N. Some
MIDI channels set to Y may be displayed as (Y). This means that there are not enough effects
resources available for that channel, and that channel’s Insert effects are not loaded. If you
want to use the Insert effects Chain for a channel displayed as (Y), try setting other channels
to N. If the Channel number of the current “AuxFX Ch” setting is set to N or (Y), the Aux
Chains will be disabled for all channels.