Controller parameter assignments, Controller conventions, Controller parameter assignments -8 – Kurzweil Forte User Manual
Page 243: Controller conventions -8
Multi Mode
Controller Parameter Assignments
10-8
Controller Parameter Assignments
In Multi Mode, each Multi has factory-set Program and Effect parameters assigned to
physical controllers (Sliders, Switch buttons, Mod Wheel, and Pedals). A controller
parameter assignment can modify an instrument sound during a performance to add
variation or expression. Moving a controller changes the value of the parameter. Any time
you do this, the display shows the controller name, assigned parameter, and value.
NOTE : Parameter assignments may not be visible if the VIEW soft
button has been pressed, or the “Display” parameter in Global Mode
has been changed.
Controller Conventions
In Multi Mode, the Zone Mute Switches above Sliders A through D control the Active/Muted
status of Zones 1 through 4. In the Factory Multis, Sliders A through D generally control the
volume for Zones 1 through 4. Sliders H and I generally control Delay and Reverb amount.
The remaining Sliders and Switches generally control various effects and synthesis parameters.