Kurzweil Forte - Manual (Page 96)

Program Mode
Save User Programs
6-22
Naming a User Program
To rename the Program, first press the RENAME soft button. You should see the following
in the display:
The display shows the current Program name. Program names can total 16 characters in
length. Use the letters and numbers printed on the Category buttons to enter the new
Program name. Rotating the Alpha Wheel or using the Value buttons can also change the
Program name. The keypad button will be turned on automatically.
Use the Left/Right cursor buttons or <<< >>> soft buttons to move the cursor. Press the +/-
button to switch between upper and lower case characters (all characters will be upper case
until you press the +/- button again).
Use the Space button to change the current character to a space, the Insert button to insert a
blank space (the selected character and all characters to the right will move one space to the
right), and the Delete button to delete the current character (all the characters to the right
will move one space to the left).