Depth, Depth -5, Fxlfo+ page – Kurzweil Forte User Manual
Page 199: Program mode midi cc numbers, The effects chain editor fxlfo+ page 8-5
The Effects Chain Editor
FXLFO+ page
8-5
Program Mode MIDI CC Numbers
None
Slider E (MIDI 24)
Zone 1 Switch (MIDI 80)
MIDI 0
Slider F (MIDI 25)
Zone 2 Switch (MIDI 81
Mod Wheel (MIDI 1)
Slider G (MIDI 26)
Zone 3 Switch (MIDI 82)
MIDI 2 to MIDI 3
Slider H (MIDI 27)
Zone 4 Switch (MIDI 83)
CC Pedal 2 (MIDI 4)
Slider I (MIDI 28)
MIDI 84
MIDI 5 to MIDI 10
Variation (MIDI 29)
Switch 1 (MIDI 85)
CC Pedal 1 (MIDI 11)
MIDI 30 to MIDI 31
Switch 2 (MIDI 86)
Slider A (MIDI 12)
Sw. Pedal 1 (MIDI 64)
Switch 3 (MIDI 87)
Slider B (MIDI 13)
MIDI 65
MIDI 88
MIDI 14 to MIDI 21
Sw. Pedal 2 (MIDI 66)
Switch 4 (MIDI 89)
Slider C (MIDI 22)
Sw. Pedal 3 (MIDI 67)
Switch 5 (MIDI 90)
Slider D (MIDI 23)
MIDI 68 to MIDI 79
MIDI 91 to MIDI 95
Depth
The Depth parameter determines the range of modulation that the Controller will apply.
When the Control source has a value of 0, the parameter’s (Param’s) value will be the Adjust
value. When the control source is all the way up, the parameter’s (Param’s) value will be the
Adjust value plus the Depth value.
FXLFO+ page
This is where you can edit the Effects-only Control sources. These are Control sources that
can be used by the effects Mods in the current Chain. The parameters on these pages work
exactly like those of the corresponding Control sources in program mode (see
).