Kurzweil Forte - Manual (Page 293)

Global Mode
MAIN1 Page
12-3
Tune
The Tuning parameter allows you to fine-tune the unit in cents—one cent is one hundredth
of a semitone (100 cents comprise a semitone). You can select any tuning from -100 cents to
100 cents. By default this parameter is set to 0.
Transpose
The Transpose parameter allows you to tune the pitch of the unit in semitones.
FX Mode
The FX Mode parameter determines how the Forte responds to interrupts with regards to
effects. You can set this parameter to either Performance or Multitrack.
With FX Mode set to Performance, the Forte minimizes disruption of existing effects
when changing Programs, and entry values will not disrupt sustained notes when changing
Programs in Program Mode. When controlling the Forte from an external sequencer in
Program Mode, setting FX Mode to Multitrack will minimize effect disruption.
Display
The Display parameter allows you to change the way that Programs and Multis are displayed
on the Program and Multi Mode main pages by selecting one of three different “views”. The
default is “Large” view, which displays the Program or Multi name with large text, along with
the category name and background image. “Favorites” view is the same as Large view, plus
the names of 10 favorite Programs and/or Multis are shown at the bottom of the display.
“List” view displays the current Program or Multi as a selected item in a scrollable circular list
that shows the next and previous Programs or Multis. “Large” and “Favorites” views can also
show controller assignments and values when a controller is moved (Sliders, Switch buttons,
Wheels, and Pedals). See “Show Controllers” below for details.
If Favorites view is selected and the Global Mode User Type parameter has been set to
Advanced, you can use the Channel/Zone buttons in Program and Multi Mode to scroll
through 16 banks of 10 Favorite Programs and/or Multis, allowing you to save and access
160 Favorites. With these settings, Program and Multi mode will show the current Favorites
Bank number in the upper right hand corner of the screen instead of the current MIDI
channel.