Destination, Destination -15, Midi page – Kurzweil Forte User Manual
Page 305
Global Mode
MIDI Page
12-15
MIDI Page
The Forte can transmit and receive MIDI via its MIDI ports and USB. The MIDI page in
Global Mode allows you to configure how this will be handled.
Parameter
Range of Values
Default Value
Destination
NONE, LOCAL, MIDI, MIDI+LO-
CAL, USB, USB+LOCAL, US-
B+MIDI, USB+MIDI+LOCAL
USB+MIDI+LOCAL
ChangeMultis
Immediate, AllKeysUp
Immediate
Bank Select
Ctl 0, Ctl 32, Ctl 0/32
Ctl 0/32
PrgChangeMode
Extended, K2600, Favorites
Extended
LocalKbdChan
None, 1 to 16
None
SysExID
0 to 127
0
Program Change
On, Off
On
Destination
The Destination parameter determines the destination of MIDI data generated by striking
keys or activating controllers. This data can be sent to the Forte sound engine, through the
MIDI out ports, or both. You can set this parameter to NONE, or any combination of the
three available destinations.
Note that this parameter is always active and works in conjunction with the Multi Mode
Destination parameter (see
). These parameters act like filters, so if the Multi Mode
Destination parameter is set to USB+MIDI+LOCAL and the Global Mode parameter is set
to LOCAL, the MIDI data will only be transmitted locally.