Kurzweil Forte - Manual (Page 231)

Keymap and Sample Editing
Editing Samples
9-11
Editing Samples
To enter the Sample Editor, first select the program you wish to edit in Program mode.
With the program selected, press the EDIT soft button to enter the Program Editor. In the
program editor the KEYMAP page will be selected (if not press the KEYMAP soft button).
With the KeyMap parameter selected on the KEYMAP page, press the Favorite1 button
again to enter the Keymap Editor. On the Edit Keymap page, select the KeyRange parameter
and use the Alpha Wheel or Previous-/Next+ buttons to choose one of the available key
ranges (if there is more than one keyrange). You can edit the existing sample of a keyrange, or
choose a new sample for the keyrange and edit that. When the Keymap parameter is selected
you can hold the Enter button and trigger notes to select different key ranges.
If you want to select a different sample, use the cursor buttons to select the Sample
parameter. Use the Alpha Wheel to select a sample. Press the Favorite1 button once more,
and you’ll enter the Sample Editor. The sample will play through the effects of the current
program. The name of stereo samples end with an S. To use a stereo sample, the Stereo
parameter must be set to On in the Program Editor, and two keymaps must be selected, see
The KEYMAP Page on page 7-23 .