System reset, Storage mode, Saving to external storage – Kurzweil Forte User Manual
Page 45: Loading from external storage, Updating the forte/forte7, System reset -18, Storage mode -18, Updating the forte/forte7 -18
Getting Started
2-18
System Reset
In the unlikely event that something goes wrong with the settings or software of your Forte,
or if you just want to start fresh, you can return the Forte to the factory default state by doing
a System Reset.
NOTE : System Reset will erase ALL of the USER Programs and Multis,
so it is important to back up your sounds before attempting to reset
Forte. Factory Program/Multis are not affected.
Storage Mode
Storage Mode facilitates loading and saving objects for the Forte.
Saving to External Storage
Programs and Multis that you have created can be saved to a USB Flash Drive or a computer/
tablet.
Loading from External Storage
Programs and Multis can be loaded onto the Forte from USB Flash Drives or a computer/
tablet. This allows you to load new sounds from Kurzweil or other developers, or to load
sounds that you have previously saved.
Updating the Forte/Forte7
Please check online for Forte updates. Detailed instructions on updating
the Forte are available with the update package. It is important that these instructions are
followed closely for trouble free updating of the Forte. This manual was written for Forte
software release v2.02 and OS 3.74. See the Tools page in Global mode (
to check the currently installed OS version.