Important safety & installation instructions, Radio and television interference, Save these instructions – Kurzweil Forte User Manual

Page 3: Caution

Advertising
background image

ii

The lightning flash with the arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

NO USER SERVICEABLE PARTS INSIDE.

DO NOT REMOVE THE COVER.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

IMPORTANT SAFETY & INSTALLATION INSTRUCTIONS

INSTRUCTIONS PERTAINING TO THE RISK OF FIRE ELECTRIC SHOCK , OR INJURY TO PERSONS

WARNING: When using electric products, basic precautions should

always be followed, including the following:

1. Read all the Safety and Installation Instructions and Explanation

of Graphic Symbols before using the product.

2. This product must be grounded. If it should malfunction or

break down, grounding provides a path of least resistance for

electric current to reduce the risk of electric shock. This product
is equipped with a power supply cord having an equipment-
grounding conductor and a grounding plug. The plug must be

plugged into an appropriate outlet which is properly installed and
grounded in accordance with all local codes and ordinances.

DANGER: Improper connection of the equipment-grounding

conductor can result in a risk of electric shock. Do not modify the
plug provided with the product – if it will not fit the outlet, have a

proper outlet installed by a qualified electrician. Do not use an
adaptor which defeats the function of the equipment-grounding
conductor. If you are in doubt as to whether the product is properly

grounded, check with a qualified serviceman or electrician.

3. Do not use this product near water – for example, near a bathtub,

washbowl, kitchen sink, in a wet basement, or near a swimming

pool, or the like.

4. This product should only be used with a stand or cart that is

recommended by the manufacturer.

5. This product, either alone or in combination with an amplifier and

speakers or headphones, may be capable of producing sound

levels that could cause permanent hearing loss. Do not operate
for a long period of time at a high volume level or a level that is
uncomfortable. If you experience any hearing loss or ringing in

the ears, you should consult an audiologist.

6. This product should be located so that its location or position

does not interfere with its proper ventilation.

7. The product should be located away from heat sources such as

radiators, heat registers, or other products that produce heat.

8. The product should be connected to a power supply only of the

type described in the operating instructions or as marked on the
product.

9. This product may be equipped with a polarized line plug (one

blade wider than the other). This is a safety feature. If you are
unable to insert the plug into the outlet, contact an electrician to
replace your obsolete outlet. Do not defeat the safety purpose of

the plug.

10. The power supply cord of the product should be unplugged

from the outlet when left unused for a long period of time. When
unplugging the power supply cord, do not pull on the cord, but
grasp it by the plug.

11. Care should be taken so that objects do not fall and liquids are

not spilled into the enclosure through openings.

12. The product should be serviced by qualified service personnel

when:

A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the

product;

C. The product has been exposed to rain;
D. The product does not appear to be operating normally or

exhibits a marked change in performance;

E. The product has been dropped, or the enclosure damaged.

13. Do not attempt to service the product beyond that described in

the user maintenance instructions. All other servicing should be

referred to qualified service personnel.

14. WARNING: Do not place objects on the product’s power supply

cord, or place the product in a position where anyone could trip

over, walk on, or roll anything over cords of any type. Do not
allow the product to rest on or be installed over cords of any type.

Improper installations of this type create the possibility of a fire
hazard and/or personal injury.

RADIO AND TELEVISION INTERFERENCE

WARNING: Changes or modifications to the instrument not expressly
approved by Young Chang could void your authority to operate the

instrument.

IMPORTANT: When connecting this product to accessories and/or

other equipment use only high quality shielded cables.

NOTE: This instrument has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This instrument

generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If
this instrument does cause harmful interference to radio or television
reception, which can be determined by turning the instrument off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the instrument and the receiver.

Connect the instrument into an outlet on a circuit other than the
one to which the receiver is connected.

If necessary consult your dealer or an experienced radio/television

technician for additional suggestions.

The normal function of the product may be disturbed by strong

electromagnetic interference. If so, simply reset the product to resume
normal operation by following the instructions in the manual. If normal

function does not resume, please use the product in another location.
NOTICE
This apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.

AVIS
Le present appareil numerique n’emet pas de bruits radioelectriques
depassant les limites applicables aux appareils numeriques de la
class B prescrites dans le Reglement sur le brouillage radioelectrique
edicte par le ministere des Communications du Canada.

SAVE THESE INSTRUCTIONS

Advertising
This manual is related to the following products: