Exposure compensation with iso auto – Canon EOS RP Mirrorless Camera User Manual
Page 103
103
Manual Exposure
Exposure Compensation with ISO Auto
If the ISO speed is set to
[AUTO]
for manual exposure shooting, you can
set exposure compensation (
Touch the exposure level indicator
[
z
: Expo.comp./AEB]
Quick Control screen
o
If ISO Auto is set, the ISO speed setting will change to obtain the standard
exposure with the set shutter speed and aperture. Therefore, you may
not obtain the desired exposure effect. In this case, set the exposure
compensation.
o
With the camera set to the <
a
> mode + ISO Auto + <
q
> (Evaluative
metering) and
[
8
C.Fn I-7: AE lock meter. mode after focus]
set to the
529), holding down the shutter button halfway will lock the
ISO speed after focus is achieved with One-Shot AF.
o
When ISO Auto is set, you can press the <
A
> button to lock the ISO speed.
o
To compare the current exposure to the exposure when you pressed the
<
A
> button initially with a manually set ISO speed, press the <
A
> button,
recompose the shot, and check the exposure level indicator.
o
With ISO Auto set and
[
8
C.Fn I-1: Exposure level increments]
set to
[1/2-
stop]
, any 1/2-stop exposure compensation will be implemented with the ISO
speed (1/3 stop) and shutter speed. However, the shutter speed displayed will
not change.