Turning on the power – Canon EOS RP Mirrorless Camera User Manual
Page 46
46
Turning on the Power
z
<
1
>
The camera turns on.
z
<
2
>
The camera is turned off and does not
function. Set the power switch to this
position when not using the camera.
Setting the Date, Time, and Time Zone
If you turn on the power switch and the date/time/zone setting screen
374 to set the date/time/zone.
Changing the Interface Language
To change the interface language, see
Automatic Sensor Cleaning
z
Sensor cleaning, which may make a small noise, is performed
automatically whenever you set the power switch to <
2
> or attach
or detach lenses. To enable automatic sensor cleaning when the power
switch is set to <
1
> as well, you can set this in
[
5
: Sensor cleaning]
(
o
If you set the power switch to <
2
> while an image is being recorded to
the card,
[Saving...]
will be displayed and the power will turn off after the
recording finishes.