Canon EOS RP Mirrorless Camera - Manual (Page 30)

30
Handling Precautions
Screen and Viewfinder
z Although the screen and viewfinder are manufactured with very high
precision technology with over 99.99% effective pixels, 0.01% or fewer
of the pixels may be dead, and there may also be spots of black, red,
or other colors. This is not a malfunction. They do not affect the images
recorded.
z If the screen is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporary and will disappear when the camera is left unused for a few
days.
z The screen display may seem slightly slow in low temperatures or
may look black in high temperatures. It will return to normal at room
temperature.
Cards
To protect the card and its recorded data, note the following:
z
Do not drop, bend, or wet the card. Do not subject it to excessive force,
physical shock, or vibration.
z
Do not touch the card’s electronic contacts with your fingers or anything
metallic.
z
Do not affix any stickers, etc. on the card.
z
Do not store or use the card near anything that has a strong magnetic
field, such as a television, speakers, or magnets. Also avoid places prone
to having static electricity.
z
Do not leave the card in direct sunlight or near a heat source.
z
Store the card in a case.
z
Do not store the card in hot, dusty, or humid locations.
Lens
z
After detaching the lens from the camera, put down
the lens with the rear end up and attach the rear lens
cap to avoid scratching the lens surface and electrical
contacts (1).
(1)