Canon EOS RP Mirrorless Camera - Manual (Page 494)

494
Reconnecting via Wi-Fi
[ D ] Computer
z On the computer, start the EOS software.
z If the computer’s connection destination has been changed, restore
the setting to connect via Wi-Fi to the camera or the same access
point as the camera.
When directly connecting the camera to a computer via Wi-Fi,
“ _ Canon0A ” is displayed at the end of the SSID.
[ l ] Printer
z
If the printer’s connection destination has been changed, restore the
setting to connect via Wi-Fi to the camera or the same access point
as the camera.
When directly connecting the camera to a printer via Wi-Fi,
“ _ Canon0A ” is displayed at the end of the SSID.