Canon EOS RP Mirrorless Camera - Manual (Page 42)

42
Inserting/Removing the Battery and Card
Insert a fully charged Battery Pack LP-E17 into the camera. The camera
can use SD, SDHC, or SDXC memory cards (sold separately). UHS-II/
UHS-I SDHC and SDXC cards are also supported. The captured images
are recorded onto the card.
o Make sure the card’s write-protect switch (1) is set upward to enable
writing and erasing.
Insertion
(1)
1
Slide the card slot/battery
compartment cover lock and open
the cover.
2
Insert the battery.
z Insert the end with the electrical
contacts.
z Insert the battery until it locks in place.
3
Insert the card.
z Insert the card with the label facing the
back of the camera as shown until it
clicks in place.
4
Close the cover.
z Press the cover until it snaps shut.