Canon EOS RP Mirrorless Camera User Manual
Page 181
181
N
Selecting the Display Speed for High-
Speed Continuous Shooting
High-speed display that switches between your shot and the live image
is available when shooting with an RF lens, with
[
z
: AF operation]
set to
[Servo AF]
, and with the drive mode set to <
o
>
[High speed
continuous]
. Display is more responsive, making it easier to follow fast-
moving subjects.
1
Select [
z
:
High speed
display].
2
Select an item.
z
Select
[Enable]
for display that switches
between each shot and the live image.
o
Images may waver or flicker during high-speed display. This occurs more often
at high shutter speeds. However, this does not affect shooting results.
o
High-speed display is not performed under the following conditions. It may
also stop as you are shooting.
•
Shutter speed slower than 1/30 sec., aperture larger than f/11, conditions
that make autofocusing difficult, and flash photography, and ISO expansion
o
[Enable]
is available when all of these conditions apply.
• With an RF lens,
[AF operation]
set to
[Servo AF]
(
185), drive mode
set to
[High speed continuous]
(
[Anti-flicker shoot.]
set to
[Disable]
[Expo. simulation]
set to
[Enable]