Canon EOS RP Mirrorless Camera User Manual
Page 259
259
Setting the Sound Recording
o
Sounds from Wi-Fi operations may be captured with built-in or external
microphones. During sound recording, using the wireless communication
function is not recommended.
o
When connecting an external microphone or headphones to the camera, be
sure to insert the plug all the way in.
o
The camera’s built-in microphone will also record the operation sound and
mechanical sound of the camera during shooting. Using Directional Stereo
Microphone DM-E1 (sold separately) may reduce such sounds in the movie.
o
Do not connect anything other than an external microphone to the camera’s
external microphone IN terminal.
o
Noise reduction is not applied to the audio played through headphones. Thus,
the audio recorded with the movie will be different.
o
Do not change the
[Sound recording]
settings when listening with
headphones. This may cause sudden loud output that may hurt your ears.
o
In
[
u
]
mode, the settings available for
[Sound recording]
are
[On]
or
[Off]
.
Set to
[On]
for automatic adjustment of the recording level.
o
Audio is also output when the camera is connected to televisions via HDMI,
except when
[Sound rec.]
is set to
[Disable]
.
o
The sound volume balance between L (left) and R (right) cannot be adjusted.
o
Sound is recorded at a 48 kHz/16-bit sampling rate.