Canon EOS RP Mirrorless Camera User Manual
Page 270
270
Recording Time-lapse Movies
o
Do not point the camera toward an intense light source, such as the sun or an
intense artificial light source. Doing so may damage the image sensor or the
camera’s internal components.
o
Time-lapse movies cannot be recorded when the camera is connected to a
computer with the interface cable, or when an HDMI cable is connected.
o
Movie Servo AF will not function.
o
If the shutter speed is 1/30 sec. or slower, the exposure of the movie may not
be displayed properly (may differ from that of the resulting movie).
o
Do not zoom the lens during time-lapse movie recording. Zooming the lens
may cause the image to be out of focus, the exposure to change, or the lens
aberration correction not to function properly.
o
When recording a time-lapse movie under a flickering light, noticeable image
flickering, horizontal stripes (noise), or irregular exposures may be recorded.
o
Images that are displayed while time-lapse movies are being recorded
may look different from the resulting movie. (For example, there may be
inconsistent brightness from flickering light sources, or noise from a high ISO
speed.)
o
When recording a time-lapse movie under low light, the image displayed
during shooting may look different from what is actually recorded in the movie.
In such cases, the <
g
> icon will blink.
o
If you move the camera from left to right (panning) or shoot a moving subject
during time-lapse movie recording, the image may look extremely distorted.
o
During time-lapse movie recording, auto power off will not take effect. Also,
you cannot adjust the shooting function and menu function settings, play back
images, etc.
o
Sound is not recorded for time-lapse movies.
o
With time-lapse movie recording, you can press the shutter button completely
to start or stop the movie recording regardless of the
[
5
: Shutter btn
function for movies]
setting.
o
With
[Interval]
set to less than 3 sec. and
[Auto exposure]
set to
[Each
frame]
, if the brightness differs greatly from the preceding shot, the camera
may not shoot at the set interval.