Canon EOS RP Mirrorless Camera - Manual (Page 83)

83
Panning
z
Set the level of background motion blur.
With [Effect] , you can set the level of background motion blur. The [Max]
setting will set a slower shutter speed to increase the background motion
blur around the subject. If the subject blur is noticeable, set [Effect] to
[Med] or [Min] to reduce the blur.
o For details on lenses compatible with <
r
> mode, visit the Canon website.
o With lenses that support <
r
> mode, the camera automatically corrects
subject blur and (based on the [Effect] setting) adjusts shutter speed,
regardless of the lens IS setting.
o The AF method can only be set to [1-point AF] or [Zone AF] . By default, it is
set to [Zone AF] , with the zone in the center of the screen selected.
o To prevent camera shake, it is recommended that you hold the camera with
both hands, tighten your arms close to your body, and track the subject’s
movement smoothly to take pictures.
o This effect is most effective with trains, cars, etc. that move at a constant
speed in one direction.
o Taking test shots or checking the image by playing it back immediately after
shooting is recommended.
o By default, <
i
> (Low-speed continuous shooting) is set. At the decisive
moment, press the shutter button completely to take the picture. You can track
moving subjects by panning the camera as you keep holding down the shutter
button to shoot continuously.