Canon EOS RP Mirrorless Camera - Manual (Page 571)

571
Troubleshooting
Movie recording stops by itself.
z
If the card’s writing speed is slow, movie recording may stop
automatically. For cards that can record movies, see = 585. To find out
the card’s writing speed, refer to the card manufacturer’s website, etc.
z
If you shoot a movie for 29 min. 59 sec., the movie recording will stop
automatically.
The ISO speed cannot be set for movie recording.
z
In shooting modes other than [
M
] , the ISO speed is set automatically. In
[
M
] mode, you can manually set the ISO speed ( = 589).
ISO 100 cannot be set or ISO speed expansion cannot be
selected during movie recording.
z Check the [ISO speed range] and [Range for
H
] setting under [
z
:
k
ISO speed settings] .
z When [
z
: Highlight tone priority] is set to [Enable] , the available ISO
speed range starts at ISO 200. Expanded ISO speed cannot be selected
even if you set an expanded range for [ISO speed range] or [Range
for
H
] under [
z
:
k
ISO speed settings] . When [
z
: Highlight tone
priority] is set to [Disable] ( = 137), you can set ISO 100/125/160 or
an expanded ISO speed.