Canon EOS RP Mirrorless Camera - Manual (Page 570)

570
Troubleshooting
High-speed sync cannot be set in <
f
> or <
d
> mode.
z
Under [
z
: External Speedlite control] , set [Slow synchro] to [1/180-
30sec. auto] or [1/180-1/60sec. auto] ( = 224).
Remote control shooting is not possible.
z
When taking still photos, set the drive mode to <
Q
> or <
k
> ( = 209).
When recording movies, set [
z
: Remote control] to [Enable] ( = 285).
z
Check the position of the remote control’s release timing switch.
z
If you are using Wireless Remote Control BR-E1, see = 217 or
= 399.
z
To use a remote control for time-lapse movie recording, see = 273.
A white
s
or red
E
icon is displayed during shooting.
z It indicates that the camera’s internal temperature is high. Image quality
of still photos may be worse when a white <
s
> icon is displayed. If
a red <
E
> icon is displayed, it indicates that shooting will soon stop
automatically ( = 291).
During movie recording, the red
E
icon is displayed.
z It indicates that the camera’s internal temperature is high. If the red <
E
>
icon is displayed, it indicates that the movie recording will soon stop
automatically ( = 291).