Canon EOS RP Mirrorless Camera User Manual
Page 502
502
Responding to Error Messages
21: No address assigned by DHCP server
What to check on the camera
z
On the camera, IP address is set to
[Auto setting]
. Is this the correct
setting?
g
If no DHCP server is used, specify the settings after setting the IP
address to
[Manual setting]
on the camera (
What to check on the DHCP server
z
Is the power of the DHCP server on?
g
Turn on the DHCP server.
z
Are there enough addresses for assignment by the DHCP server?
g
Increase the number of addresses assigned by the DHCP server.
g
Remove devices assigned addresses by the DHCP server from the
network to reduce the number of addresses in use.
z
Is the DHCP server working correctly?
g
Check the DHCP server settings to make sure it is working correctly
as a DHCP server.
g
If applicable, ask your network administrator to ensure the DHCP
server is available.