Canon EOS RP Mirrorless Camera - Manual (Page 568)

568
Troubleshooting
ISO 100 cannot be set. ISO speed expansion cannot be selected.
z
Check the [ISO speed range] setting under [
z
:
z
ISO speed
settings] .
z
When [
z
: Highlight tone priority] is set to [Enable] or [Enhanced] ,
the available ISO speed range is ISO 200–40000 for still photo shooting.
Even if you set [ISO speed range] under [
z
: ISO speed settings] to
expand the setting range, you cannot select L (equivalent to ISO 50), H1
(equivalent to ISO 51200), or H2 (equivalent to ISO 102400). When [
z
:
Highlight tone priority] is set to [Disable] ( = 137), you can set ISO
100/125/160, L, or H1/H2.
Even if I set a decreased exposure compensation, the image
comes out bright.
z Set [
z
: Auto Lighting Optimizer] to [Disable] ( = 136). When [Low] ,
[Standard] , or [High] is set, even if you set a decreased exposure
compensation or flash exposure compensation, the image may come out
bright.
I cannot set the exposure compensation when both manual
exposure and ISO Auto are set.
z
See = 103 to set the exposure compensation.
Not all the lens aberration correction options are displayed.
z
Although [Chromatic aberr corr] and [Diffraction correction] are
not displayed when [Digital Lens Optimizer] is set to [Enable] , both
functions are applied in shooting, as when set to [Enable] .
z
During movie recording, [Digital Lens Optimizer] or [Diffraction
correction] will not be displayed.