Canon EOS RP Mirrorless Camera - Manual (Page 385)

385
Sensor Cleaning
o During sensor cleaning, never set the power switch to <
1
>. This will
cause the shutter to move, which may damage the image sensor or
shutter curtains.
o The surface of the image sensor is extremely delicate. Clean the sensor with
care.
o Use a plain blower without any brush attached. A brush can scratch the
sensor.
o Do not insert the blower tip inside the camera beyond the lens mount. This
may damage the shutter curtains.
o Never use pressurized air or gas to clean the sensor. Pressurized air may
damage the sensor, and sprayed gas may freeze on the sensor and scratch it.
o If a smudge that cannot be removed with a blower remains, having the sensor
cleaned by a Canon Service Center is recommended.