ZyXEL Communications IP PBX X6004 - Manual (Page 124)

Chapter 4 The Web Configurator
X6004 User’s Guide
124
4.7 Resetting the X6004
If you forget the administrator password, you will need to reset the X6004 back to
the factory defaults.
Use the RESET button on the front panel of the X6004 to reset the X6004 back to
factory defaults. Press and hold the RESET button for 10 seconds. The X6004 will
reload its factory defaults.
The X6004 is reinitialized with a default configuration file including the default
administrator username (admin) and password (1234). The LAN IP address of the
X6004 also reverts to the default 192.168.1.12 and the WAN IP address reverts to
172.16.1.1.
4.8 Rebooting the X6004
If the X6004 is not performing as expected, you can reboot the system as a basic
troubleshooting step. Rebooting the X6004 does not change any of the
configuration settings. Rebooting simply restarts all of the subsystems (voice
processing, network interfaces and so on) and reloads the latest saved
configuration on the X6004.
Click Maintenance > Reboot to open the Reboot screen. Click the Reboot
button to restart the X6004.
Figure 39 Maintenance > Reboot