ZyXEL Communications IP PBX X6004 - Manual (Page 190)

Chapter 9 Voice Mail
X6004 User’s Guide
190
9.2 The Voice Mail Screen
Use this screen to set up the voice mail settings on the X6004. To access this
screen, click Configuration > PBX > Server Configuration > Voice Mail.
Figure 77 Server Configuration > Voice Mail
Each field is described in the following table.
Table 43 Server Configuration > Voice Mail
LABEL DESCRIPTION
Voice Mail Management
Max Length per
Call
Specify the maximum number of seconds for each voice mail message.
This value can be from 1 to 90 seconds.
Max Usage per
User Specify the maximum number of seconds for all voice mail messages
for each extension. When a user hits this limit then the X6004 will no
longer save voice mail messages. This value can be from 1 to 300
seconds. A hard disk installed can increase this value to up to 5000
seconds.
E-mail Content
E-mail Subject
Enter up to 150 alphanumeric characters (a-z, A-Z, 1-0, all punctuation
included) as the subject line for e-mails sent out by the X6004 to notify
users of pending voice mails.