ZyXEL Communications IP PBX X6004 - Manual (Page 352)

Chapter 22 Call Services
X6004 User’s Guide
352
22.6 The Auto Callback Screen
The auto callback feature is used when a caller encounters a busy signal when
dialing one of the extensions. The caller can then request the X6004 to
automatically call both parties when both of the extensions are free.
Click Configuration > PBX > Call Services > Auto Callback to configure the
auto callback feature.
Figure 200 Auto Callback
The following table describes the labels in this screen.
Table 123 Auto Callback
LABEL DESCRIPTION
Active Select this to activate the auto callback feature.
Queue Size Select a limit to the number of auto callback requests for the X6004.
Apply Click this to save your changes.
Reset Click this to set every field in this screen to its last-saved value.