ZyXEL Communications IP PBX X6004 - Manual (Page 132)

Chapter 5 Network Deployment
X6004 User’s Guide
132
5.3 The WAN Screen
You can configure your connection to the ISP or the default gateway router as well
as DNS server information. This allows the X6004 to communicate with IP devices
on the WAN.
Use this screen to set up a connection with the ISP or the default gateway router.
To access this screen, click Configuration > Network > WAN.
Figure 44 Network > WAN
Each field is described in the following table.
Table 15 Network > WAN
LABEL DESCRIPTION
WAN Ethernet
TCP/IP Settings
Get
automatically
from ISP
Select this if your ISP did not assign you a static IP address. Click
Renew to send a request to the DHCP server for a new IP address.
Static IP
(Default) Select this if your ISP or network administrator assigned you a static IP
address.
IP Address Enter the IP address provided by your ISP or network administrator.
Subnet Mask Enter the subnet mask your ISP or network administrator provided for
the remote node.
Default
Gateway Enter the IP address your ISP or network administrator provided for the
default gateway to the Internet.
Primary DNS Enter the IP address of the DNS server your ISP or network
administrator provided to you.
Secondary DNS Enter the IP address of the second DNS server your ISP or network
administrator provided to you. If you were not provided one, leave this
field blank.