ZyXEL Communications IP PBX X6004 - Manual (Page 439)

Chapter 30 Administrator Accounts
X6004 User’s Guide
439
30.3.2 Edit an Administrator Account
Use this screen to change the password, description or rank of an existing
administrator account. To access this screen, click Maintenance >
Administrator List > Edit.
Figure 253 Administrator List > Edit
Each field is described in the following table.
Table 171 Administrator List > Edit
LABEL DESCRIPTION
Edit
administrator
profile
Password
Type a new password for this administrator account. You can use up to
32 alphanumeric characters. Spaces are not allowed.
Confirm
Password Retype the new password for this administrator account.
Description Type a short description for this administrator account. You can use up
to 63 alphanumeric characters. Spaces are allowed.
Rank Select the rank you want this administrator account to have. You can
select:
• Full admin - to allow this account to perform all configuration
changes on the X6004.
• Debug admin - to allow this account to have the same privilege
level as the read only account . This type of account is reserved
for use by service technicians to perform additional diagnostics.
• Read only - to allow this account to only be able to view
configuration details on the X6004.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving your changes.