ZyXEL Communications IP PBX X6004 - Manual (Page 236)

Chapter 13 Authority Group
X6004 User’s Guide
236
13.3.11 The Add an FXS Extension Screen
Use this screen to add an FXS extension to an authority group on the X6004. To
access this screen, click the Add icon in the Authority Group configuration
screen.
Figure 108 Add an FXS Extension
Auto Provision
Interval Time Specify the amount of time in seconds to have the specified SIP client
wait before the next time of provision file downloading from the X6004.
Enter the time range between 21600 to 604800 seconds (between 6 to
168 hours). The default value is 43200 seconds (12 hours).
Auto Provision
Delay Time If many SIP clients download auto-provisioning files from the X6004 at
the same time, the X6004 may be overloaded. The total interval
between auto provisioning file downloads is the interval time plus the
delay time. For example of SIP phone A has the interval time of 10
hours and delay time of 10 seconds, the next auto provisioning
download will be 10 hours and 10 seconds later.
Select 1~30 seconds or leave it as default, Random, which is to have a
random delay time of between 1 to 30 seconds for the specified SIP
client.
ATA device Select this when your SIP client is a ZyXEL ATA (Analog Telephone
Adapter) device. An ATA allows you to make VIP calls from a connected
analog phone.
Port No. This field is available when you select the ATA device field. An ATA
device can have up to eight SIP numbers (for ports 1 to 8).
Select an ATA port number to which you want to assign the SIP
number.
Apply Click this to save your changes and have the X6004 prepare the auto
provisioning file for ZyXEL SIP phones downloading.
Back to Peer
List Click this to go back to the Authority Group configuration screen
without saving your changes.
Table 63 SIP Extension: Auto Provision (continued)
LABEL DESCRIPTION