ZyXEL Communications IP PBX X6004 - Manual (Page 221)

Chapter 13 Authority Group
X6004 User’s Guide
221
13.3.1 The Batch Add Screen
Use this screen to configure a range of extensions for IP phones on your network.
To access this screen, click the Batch Add button in the Authority Group
configuration screen.
Figure 98 Batch Add SIP Extensions
Each field is described in the following table.
Table 54 Batch Add SIP Extensions
LABEL DESCRIPTION
Batch Add SIP Peers
Group
Select the authority group you want these extensions to belong to.
Start Number Type the first extension number for this range of extensions. Extensions
can be 3-10 digits long.
Step/Interval Type the value of the increment, which the X6004 uses to create this
range of extensions.
Amount Type the number of extensions you want to create. The number of
extensions you can create is limited by the subscription service
registered on the X6004 (see
Section 35.4 on page 483 ).
SIP Auth.
Password When you create multiple SIP extensions, you automatically create SIP
accounts on the X6004. The user names for these SIP accounts are the
extension numbers. The passwords for the SIP accounts are also the
extension numbers. To make the passwords more secure you can add a
prefix or a postfix to these extensions.
For example type “1” in the Prefix field and the SIP account passwords
for the SIP extensions you create become “1 + extension number”.
You can enter up to three letters, numbers or a combination of letters
and numbers in the Prefix and Postfix fields.