ZyXEL Communications IP PBX X6004 - Manual (Page 127)

X6004 User’s Guide
127
C
H A P T E R
5
Network Deployment
5.1 Overview
This chapter shows you how to deploy the X6004 on your network, using the
Configuration > Network screens.
The following diagram shows a sample network deployment of the X6004. The
WAN port is connected to a DMZ interface on the default gateway router. The
X6004 uses the WAN interface to connect to a SIP server at the ITSP. SIP IP
devices use the WAN IP address of the X6004 to connect to it.
On the LAN, SIP IP phones use the LAN IP address of the X6004 to connect to it.
Figure 41 Network Deployment Overview
5.1.1 What You Can Do in this Chapter
• Use the LAN screen to set up the LAN IP address of the X6004. See Section 5.2
on page 130 .
• Use the WAN screen to set up a connection with the ISP or the default gateway
router. See Section 5.3 on page 132 .
• Use the DDNS screen to configure your Dynamic DNS settings. See Section 5.4
on page 133 .
Internet
ITSP
DMZ