ZyXEL Communications IP PBX X6004 - Manual (Page 518)

Chapter 38 Troubleshooting
X6004 User’s Guide
518
38.6 The Console Port
In some special circumstances, such as when you forget your admin password or
the X6004’s LAN IP address, you may need to log in directly to the command line
and make changes to the configuration there. The following sections show you
how to do this.
Note: For details on the X6004 command line features, see the Command Line
Reference Guide included on your installation disc.
38.6.1 Use the Console Port to Access the CLI
1
Connect your computer to the console port on the X6004 using the appropriate
cable.
2
Use terminal emulation software with the following settings:
3
Press [ENTER] to open the login screen.
38.6.2 The Login Screen
After you have successfully established a connection to the X6004 using a direct
console connection or SSH, a login screen displays as shown below. For your first
login, enter the default administrator login username “admin” and password
“1234”.
Table 201 Default Settings for the Console Port
SETTING
DEFAULT
VALUE
Terminal Emulation VT100
Baud Rate 115200 bps
Parity None
Number of Data Bits 8
Number of Stop Bits 1
Flow Control None
localhost login: admin
Password: