ZyXEL Communications IP PBX X6004 - Manual (Page 394)

Chapter 26 Status Observation
X6004 User’s Guide
394
26.4 The FXS Peer Status Screen
Use the FXS Peer screen to view status information about the X6004’s FXS
extensions. Click Monitor > Status Observation > FXS Peer in the web
configurator to view the screen as shown.
Figure 228 Status Observation > FXS Peer
Each field is described in the following table.
Table 145 Status Observation > FXS Peer
LABEL DESCRIPTION
Query Use this section to specify your query criteria. You can select an
attribute, value pair for your search. You can choose to query by:
• Machine ID - choose the X6004 (if you have a ZyStack configured)
for which you want to view status details of FXS extensions.
• Call Status - select whether you want to view status details about
extensions that are currently busy or idle.
Click Query to update the status detail table in the FXS Peer section of
the screen.
Refresh interval Enter how often (seconds) you want the X6004 to update this screen.
Click Apply to update the screen immediately.
If you do not want this screen to update periodically, enter 0.
FXS Peer This section displays the status detail table.
Machine ID This field displays the auto-configured name of the X6004.
Slot This field displays the slot (A - D) where the FXS interface card is
installed.
Port This field displays the port number on the FXS interface card.
Number This field displays the extension number associated with an FXS port or
it displays N/A, if no FXS extension has been configured for an FXS
port.
Call Status This field displays busy if an FXS extension is currently engaged,
otherwise it displays idle.
Mobile
Extension
Status This indicates whether the connection’s mobile extension is activated or
not, or if it is unspecified.