ZyXEL Communications IP PBX X6004 - Manual (Page 449)

X6004 User’s Guide
449
C
H A P T E R
3 2
Inactivity Timer
32.1 Overview
There is a default system management idle timeout of ten minutes (six hundred
seconds) defined in the Maintenance > Administration > Inactivity Timer
screen. The X6004 automatically logs you out if the management session remains
idle for longer than this timeout period. The management session does not time
out when a statistics screen is polling.
32.2 The Inactivity Timer Screen
Use this screen to set the maximum time period allowed before an idle session
expires. To access this screen, click Maintenance > Administration >
Inactivity Timer.
Figure 257 Administration > Inactivity Timer
Each field is described in the following table.
Table 175 Administration > Inactivity Timer
LABEL DESCRIPTION
Web
Configurator
Inactivity Timer Type how many minutes a management session (either via the web
configurator or SMT) can be left idle before the session times out. The
default is 10 minutes. After it times out you have to log in with your
password again. Very long idle timeouts may have security risks. A
value of "0" means a management session never times out, no matter
how long it has been left idle (not recommended).
Apply Click this to save your changes and to apply them to the X6004.
Reset Click this to set every field in this screen to its last-saved value.