ZyXEL Communications IP PBX X6004 - Manual (Page 397)

Chapter 26 Status Observation
X6004 User’s Guide
397
26.7 The FXO Trunk Status Screen
Use the FXO Trunk screen to view status information about external connections
via FXO interface cards. Click Monitor > Status Observation > FXO Trunk in
the web configurator to view the screen as shown.
Figure 231 Status Observation > FXO Trunk
Each field is described in the following table.
Table 148 Status Observation > FXO Trunk
LABEL DESCRIPTION
Query Use this section to specify your query criteria. You can select an
attribute, value pair for your search. You can choose to query by:
• Machine ID - choose the X6004 (if you have a ZyStack configured)
for which you want to view status details of FXO connections.
• Call Status - select whether you want to view status details about
FXO lines that are currently busy or idle.
Click Query to update the status detail table in the FXO Trunk section
of the screen.
Refresh interval Enter how often (seconds) you want the X6004 to update this screen.
Click Apply to update the screen immediately.
If you do not want this screen to update periodically, enter 0.
FXO Trunk This section displays the status detail table.
Machine ID This field displays the auto-configured name of the X6004.
Slot This field displays the slot (A - D) where the FXO interface card is
installed.
Port This field displays the port number on the FXO interface card.
Group Name This field displays the outbound line group name to which an FXO line is
assigned.
Call Status This field displays busy if an FXO line is currently engaged. Otherwise,
it displays idle.
Disconnect This icon appears when a connection is off-hook and allows you to
disconnect that connection by clicking it.