ZyXEL Communications IP PBX X6004 - Manual (Page 62)

Chapter 3 Tutorials
X6004 User’s Guide
62
3.1.4 Auto Provisioning
A ZyXEL IP phone that supports auto provisioning can get a configuration text file
from the X6004 (see
Appendix on page 523 for supported IP phones). The
configuration file contains the SIP settings that the SIP device uses to register
with the X6004. The following graphic shows an IP phone (A), softphone (B), VoIP
gateway (C), and ATA (D) downloading configuration text files from the X6004.
Figure 13 Auto Provisioning
After you configure the SIP extensions (see Section 3.1.1 on page 57 ) and make
your network connections (see Figure 11 on page 60 ), use the following directions
to map each SIP extension to the appropriate SIP device. You need the MAC
address of each SIP device (or the serial number if it is a softphone).
1
Click Configuration > PBX > Server Configuration > Auto Provision. Then
click a SIP extension’s Edit icon.