ZyXEL Communications IP PBX X6004 - Manual (Page 176)

Chapter 7 Auto Provision
X6004 User’s Guide
176
7.2.2 Auto Provision View SPTGEN
Use this screen to view the configuration file (SPTGEN) file for a specific extension.
To access this screen, click Configuration > PBX > Server Configuration >
Auto Provision and click the Advanced icon next to the extension for which you
want to view the SPTGEN file.
The SPTGEN file displays the configuration settings sent from the X6004 to a
ZyXEL device configured for auto provisioning. Click Cancel to go back to the
Auto Provision screen.
7.3 snom Profile Setup
If an auto provisioning file has been configured for a SIP extension, this screen
displays the mapping between SIP extensions and snom VoIP device’s MAC
addresses or serial numbers. To access this screen, click Configuration > PBX >
Server Configuration > Auto Provision > snom Profile Setup.
Figure 70 Auto Provision > snom Profile Setup