ZyXEL Communications IP PBX X6004 - Manual (Page 218)

Chapter 13 Authority Group
X6004 User’s Guide
218
13.2.2 The Add/Edit Authority Group Screen
Use the Add Authority Group screen to create a new authority group. Use the
Edit Authority Group screen to change the description of an existing authority
group. Only the screen used to add a new authority group is shown. Click the Add
(or Edit) icon in the Authority Group screen to view the screen as shown.
Note: Only the Add Authority Group screen is shown in the following figure. In the
Edit Authority Group screen, not all of the fields are available.
Figure 96 Add/Edit Authority Group
Each field is described in the following table.
Table 52 Add/Edit Authority Group
LABEL DESCRIPTION
Machine ID This field is only available when adding a new authority group. If you
have configured ZyStack, select the X6004 on which you want to create
this authority group.
Group Name Type a new name or modify an existing name for this authority group.
You can use 1-20 alphanumeric characters (A-Z, a-z, 0-9) and
underscores (_).
Group ID Type 1-8 digits to use as an ID for this authority group.
Description Type a brief description for this authority group. You can use 0-63
alphanumeric characters (A-Z, a-z, 0-9), underscores (_), hyphens (-)
and spaces. 0 means this field can be left blank.
Add/Apply If you are creating a new authority group, click Add to add this
authority group to the X6004.
If you are editing an existing authority group settings, click Apply to
save your changes to the X6004.
Cancel Click this to go back to the main Authority Group screen without
saving your changes.