ZyXEL Communications IP PBX X6004 - Manual (Page 481)

Chapter 35 License Control
X6004 User’s Guide
481
35.2 The Registration Screen
Use this screen to register your X6004 with myZyXEL.com and activate a service,
such as a softphone extension license. Click Maintenance > License Control >
Registration in the navigation panel to open the screen shown next.
Figure 280 License Control > Registration
Each field is described in the following table.
Table 189 License Control > Registration
LABEL DESCRIPTION
Device
Registration If you select Existing myZyXEL.com account, only the User Name
and Password fields need to be filled in.
New
myZyXEL.com
account If you haven’t created an account at myZyXEL.com, select this option
and configure the following fields to create an account and register your
X6004.
Existing
myZyXEL.com
account If you already have an account at myZyXEL.com, select this option and
enter your user name and password in the fields below to register your
X6004.
User Name Enter a user name for your myZyXEL.com account. The name should be
between 6 ~ 20 alphanumeric characters. Underscores are allowed but
spaces are not.
Check Click this button to check with the myZyXEL.com database to verify the
user name you entered has not been used.
Password Enter a password of between 6 ~ 20 alphanumeric characters.
Underscores are allowed but spaces are not.
Confirm
Password Enter the password again for confirmation.
E-Mail Address Enter your e-mail address. You can use up to 80 alphanumeric
characters (periods and the underscore are also allowed) without
spaces.