ZyXEL Communications IP PBX X6004 - Manual (Page 363)

Chapter 23 ZyStack
X6004 User’s Guide
363
however, has not been configured as a local subnet. Calls that originate from
Subnet 2 must go through X6004 A and B in order to reach SIP clients connected
to B.
Figure 211 Internal Call Routing
23.1.3 Before You Begin
Before you start to configure a ZyStack, please do the following:
All the X6004s should use the same interface, either LAN or WAN, to create a
ZyStack. The setting on the master X6004 determines which interface the X6004s
should use.
23.2 ZyStack Configuration
Use this screen to view and manage your ZyStack settings. Click Configuration >
ZyStack > Configuration in the navigation panel to view the screen as shown.
Figure 212 ZyStack > Configuration
192.168.1.1
172.10.10.1
192.168.1.102
192.168.1.2 A B
10.1.1.1
Subnet 2
172.10.10.0/24
Subnet 1
192.168.1.0/24
Subnet 3
10.1.1.0/24