ZyXEL Communications IP PBX X6004 - Manual (Page 235)

Chapter 13 Authority Group
X6004 User’s Guide
235
13.3.10 The Auto Provision Screen
Use this screen to generate the auto provision file for the SIP extension on the
X6004. To access this screen, click the Auto Provision tab in any of the SIP
extension configuration screen to view the screen as shown.
Figure 107 SIP Extension: Auto Provision
Each field is described in the following table.
MWI Enable Check this box to enable Message Waiting Indicator (MWI) mode for
this extension. The X6004 sends a beeping tone to the IP phone when
there is at least one voicemail for this extension.
Group Pickup Check this box if you want to enable the group pickup feature for this
extension. If this extension is added to a pickup group, then the phone
at this extension rings when any extension that is part of this pickup
group is called. See
Chapter 15 on page 255 for more information on
group pickup.
Apply Click this to save your changes.
Back to Peer
List Click this to go back to the Authority Group configuration screen
without saving your changes.
Table 62 SIP Extension: Advanced (continued)
LABEL DESCRIPTION
Table 63 SIP Extension: Auto Provision
LABEL DESCRIPTION
MAC Address Type the MAC address of your SIP phone in this field. You can leave this
field empty when your use a SIP softphone.
Serial No. Type the serial number of your SIP phone in this field. You can leave
this field empty when you use a SIP hand phone.
Auto Provision
Active Select On to activate auto provision or Off to deactivate it.